CodeLock CL5000 electronic Manual de usuario descargar pdf (Pagina 11)

CL4010SSAU Latch

Outside lever turns freely without operating

the latchbolt. When valid code is entered

and blue light burns, the lever will retract the

latchbolt. When the door closes the spring

latch will automatically lock the door. The key

will open the door for management functions.

The key may be used to set the lock into Code

Free mode so that anyone can open the door

without using a code. Code Free mode can

also be programmed at the keypad using the

Master Code.

Codelock CL4000 Range

TECHNICAL SPECIFICATIONS

Door thickness 32mm - 65mm (1

”-2

”)

Spindle type 8mm (

”) spring loaded spindle

Body material Zinc alloy

Non handed Lock will fit doors hung on the left or right

Cylinder 5 pin C4 PD Cylinder incorporated

Latch (CL4010SSAU)

Medium duty, stainless steel latchbolt head with

“anti” shim deadlocking plunger, 8mm (

”) follower.

Designed to match Australian Standard size

Tubular Latch dimensions.

60mm (2

”) backset, requires 25mm (1”) hole,

82mm (3

”) deep.

70mm (2

”) backset, requires 25mm (1”) hole,

92mm (3

”) deep.

Mortice Lock (CL4010MORTBSS)

Complete with adaptor kit allowing installation onto most

Australian Standard Mortice Locks (Mortice Lock &

Furniture not supplied)

Batteries

4xAA Cells.

Code Free mode can be set electronically at the keypad or

mechanically by means of the override key.

For internal use.

Programming Options

01 – Enter new User Code

02 – Suspend User Code

03 – Restore User Code

04 – Suspend all User Codes

05 – Restore all User Codes

06 – Set unlock time

07 – One-time User Codes

08 – Set Code Free mode

09 – Cancel Code Free mode

10 – Change Master Code

11 – Cancel emergency open

12 – Delete all User Codes

13 – Set or change Sub-Master Code

14 – Delete Sub-Master Code

15 – LED locked / unlocked status

The lock can store up to 80 different User Codes. Codes may be 4, 5 or 6

digits long. Programming is via the keypad, using the Master Code.

The lock has fitted as standard two alarm release terminals. REM1 is used

to open the lock from a reception desk button or answerphone. REM2

can be linked to an alarm system which, when activated by a momentary

contact, will release the door for 30 minutes. This allows emergency

personnel to enter the room to rapidly check that no one has been

trapped or overlooked.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Comentarios a estos manuales

Sin comentarios

CodeLock CL5000 electronic Manual de usuario Pagina 11

Comentarios a estos manuales