Allows up to 80 User Codes 4, 5 or 6 digits long
On door programming via Master Codes
Allows up to 10 one-time User Codes to be entered
Locked
• / Unlocked • LED indicator option
PVD weather resistant, low maintenance finish
Over 200,000 operations from 4 x AA cells (supplied)
Tamper alarm and low battery warning
Connections for remote release by reception
desk button, and alarm release included
Code Free entry mechanically by key or
electronically from the keypad
C4 Keyway PD Cylinder
CL5010SSAU Latch
Outside lever turns freely without operating
the latchbolt. When valid code is entered
and blue light burns, the lever will retract the
latchbolt. When the door closes the spring
latch will automatically lock the door. The key
will open the door for management functions.
The key may be used to set the lock into Code
Free mode so that anyone can open the door
without using a code. Code Free mode can
also be programmed at the keypad using the
Master Code.
Codelock CL5000 Range
TECHNICAL SPECIFICATIONS
Door thickness 32mm - 65mm (1
3
/
8
”-2
1
/
2
”)
Spindle type 8mm (
5
/
16
”) spring loaded spindle
Body material Zinc alloy
Non handed Lock will fit doors hung either on the
left or right
Cylinder 6 pin C4 PD Cylinder incorporated
Cylinder accepts restricted plugs
Latch (CL5010SSAU)
Medium duty, stainless steel latchbolt head with
“anti” shim deadlocking plunger, 8mm (
5
/
16
”) follower.
Designed to match Australian Standard size
Tubular Latch dimensions.
60mm (2
3
/
8
”) backset, requires 25mm (1”) hole,
82mm (3
1
/
4
”) deep.
70mm (2
3
/
4
”) backset, requires 25mm (1”) hole,
92mm (3
5
/
16
”) deep.
Batteries
4xAA Cells.
Code Free mode can be set electronically at the keypad
or mechanically by means of the override key.
For internal and external use.
Programming Options
01 – Enter new User Code
02 – Suspend User Code
03 – Restore User Code
04 – Suspend all User Codes
05 – Restore all User Codes
06 – Set unlock time
07 – One-time User Codes
08 – Set Code Free mode
09 – Cancel Code Free mode
10 – Change Master Code
11 – Cancel emergency open
12 – Delete all User Codes
13 – Set or change Sub-Master Code
14 – Delete Sub-Master Code
15 – LED locked / unlocked status
The lock can store up to 80 different User Codes. Codes may be 4, 5 or 6
digits long. Programming is via the keypad, using the Master Code.
The lock has fitted as standard two alarm release terminals. REM1 is used
to open the lock from a reception desk button or answerphone. REM2
can be linked to an alarm system which, when activated by a momentary
contact, will release the door for 30 minutes. This allows emergency
personnel to enter the room to rapidly check that no one has been
trapped or overlooked.
13
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales